SPECIALTY CHEMICALS
Specialty chemicals that are added to base-chemistries to improve performance
A wax and acrylic (water) base, respectively, concrete curing compounds
Best for use as protection to fresh concrete after placement to prevent over rapid water evaporation resulting to cracks
Conforms to ASTM C309-80 Type I and II
A silicate base set accelerator, which imparts faster set time and curing development for Slope Protection Mixtures
Best recommended for shotcrete works (above and underground application) as this imparts higher bonding capacity/less rebound
Dosage ranges from 3% – 10% on the weight of cementitious materials depending on design mix
An oil base and water base form release agents, respectively
Suitable for all types of concrete and mortar formworks
Its chemical reaction with the cement paste forms a “bond breaking” film which enables the formwork to be easily stripped
A Base Coat Adhesive (one component – dry powder) for EIFS Application
A polymer modified cementitious base material, which also imparts a water resistant property and excellent bonding capability to any substrate
A mineral admixture added to concrete and mortar to impart improved properties as follows: Increased compressive strength, higher density, and increased impermeability to water and other harsh chemicals
Polypropylene base fiber / Organic Fiber / Synthetic Fiber (Micro and Macro) added to concrete and mortar which gives concrete higher tensile strength, improved bonding, reduces cracks and shrinkage & replaces rebars and/or wire mesh for thin concrete topping
Iron Phosphate base corrosion remover and sealer for steel rebars, etc
Weather resistant, super flexible, strong and anti corrosive Polyurethane and Silicon Sealant, which comes in colors like white, black and gray (U-Chem Lejell).
Polymer Base Soil Stabilizer, which can be applied directly to soil by spray &/or mix with soil or together with cement and limestone (CTB).