SuperBond AB (For Adhesive and Basecoat Application)

750.00

PACKAGING

SuperBond AB is available in 25-kg self-sealing multi-ply paper bag with PE plastic liner.

APPLICATION

For Use as an Adhesive

  1. Apply the SuperBond AB to the back of the EPS Insulation Board with a notched trowel.
  2. Apply the SuperBond AB coated side of the insulation board to the substrate.
  3. Ensure that the entire piece of the insulation board has been firmly attached to the substrate.
  4. Allow the SuperBond AB to set for a minimum of 24 hours prior to working on the insulation board.

For Use as a Base Coat

  1. Apply the SuperBond AB to the substrate a minimum of 1/16″ (1.6mm) thick.
  2. Completely embed the mesh into this coat.
  3. Trowel smooth, ensuring that no mesh is visible.

For Use as a Skim Coat

  1. Apply the material to the area needing to be leveled.
  2. Application method will vary due to job conditions.

For Use with EPS Foam Shapes

  1. Apply the SuperBond AB to the back of the foam shape with a notched trowel.
  2. Firmly apply the SuperBond AB coated side of the foam shape to the substrate.
  3. Apply the base coat to the foam shape a minimum of 1/16″ (1.6mm) thick.
  4. Completely embed reinforcing mesh into this coat.
  5. Trowel smooth, ensuring that no mesh is visible.

 

Category:

Description

SuperBond AB is a dry blend, polymer-modified cementitious material that when mixed with water at the job site produces a high-performance, easily applied adhesive and base.

 

RECOMMENDED FOR 

SuperBond AB is recommended for use as an adhesive or base coat for all EIFS and EPS foam shapes and may be used as a leveling coat over approved substrates in residential and commercial wall assemblies.

FEATURES/BENEFITS

 

Reviews

There are no reviews yet.

Be the first to review “SuperBond AB (For Adhesive and Basecoat Application)”

Your email address will not be published. Required fields are marked *